当前位置:首页 > LED检测认证 > 正文

石家庄代孕公司_NSLM343420A输出LED电源解决方案

石家庄代孕公司国内首家专业性公司,以资深医生资源为核心,成熟的流程体系集特色服务于一体,提供一站式健康生育咨询及健康生育服务,是你放心的选择。

石家庄代孕公司
石家庄代孕公司_了解代孕分娩的过程对以后分娩有帮助。提供找代孕妈妈、免费咨询代孕价格等。我们拥有专业的代孕人员。真诚、真切是我们工作的首要态度。
NS公司的LM3434是自适应的DC/DC降压恒流电流控制器,提供了用于大功率LED照明的恒定电流.输出配置可使多个LED阳极连接到地以获得散热器最大效率.输入工作电压-9V到-30V,输出电流大于6A,PWM频率大于30kHz,开关频率高达1MHz,主要用在投映系统,固态照明和汽车照明.本文介绍了LM3434主要特性,方框图,10A输出和20A输出应用电路图,以及LM3434 20A输出评估板电路,材料清单和PCB布局图.

The LM3434 is an adaptive constant on-time DC/DC buck (step-down) constant current controller (a true current source). The LM3434 provides a constant current for illuminating high power LEDs. The output configuration allows the anodes of multiple LEDs to be tied directly to the ground referenced chassis for maximum heat sink efficacy. The high frequency capable architecture allows the use of small external passive components and no output capacitor while maintaining low LED ripple current. Two control inputs are used to modulate LED brightness. An analog current control input is provided so the LM3434 can be adjusted to compensate for LED manufacturing variations and/or color temperature correction.

The other input is a logic level PWM control of LED current. The PWM functions by shorting out the LED with a parallel switch allowing high PWM dimming frequencies. High frequency PWM dimming allo二、在清洁维护时不要改动灯具的结构,也不要随意改换灯具的部件,在维护后,应按原样将灯具装好,不要漏装、错装灯具零部件。ws digital color temperature control, interference blanking, field sequential illumination, and brightness control. Additional features include thermal shutdown, VCC under-voltage lockout, and logic level shutdown mode. The LM3434 is available in a low profile LLP-24 package.

LM3434主要特性:

■ Operating input voltage range of -9V to -30V w.r.t. LED anode

■ Control inputs are referenced to t另外据科学家们测定,LED通电发光时,有10%的电能可以转化成光能,而白炽灯泡的转化效率只有7-8%,由此可见,要达到同等的照明效果,he LED anode

■ Output cur方针调控 小品牌更简单受冲击rent greater than 6A

■ Greater than 30kHz PWM frequency capable

■ Negative output voltage capability allows LED anode to be tied directly to chassis for maximum heat sink efficacy

■ No output capacitor required

■ Up to 1MHz switching frequency

■ Low IQ, 1mA typical

■ Soft start

■ Adaptive programmable ON time allows for constant ripple current

■ LLP-24 package

LM3434应用:

■ Projection systems

■ Solid state lighting

■ Automotive lighting

图1. LM3434方框图

图2. LM3434 10A输出应用电路图

图3. LM3434 20A输出应用电路图t

LM3434 20A输出评估板

The evaluation board is designed to provide a constant current in the range of 4A to 20A. The LM3434 requires two input voltages for operation. A positive voltage with respect to GND is required for the bias and control circuitry and a negative voltage with respect to GND is required for the main power input. This allows for the capability of using common anode LEDs so that the anodes can be tied to the ground referenced chassis. The evaluation board only requires one input voltage of -9V to -30V with respect to GND. The positive voltage is supplied by the LM5002 circuit. The LM5002 circuit also provides a UVLO function to remove the possibility of the LM3434 from drawing high currents at low input voltages during startup.

Initially the output current is set at the minimum of approximately 4A with the POT P1 fully counter-clockwise. To set the desired current level a short may be connected between LED+ and LED-, then use a current probe and turn the POT clockwise until the desired current is reached. The current may be adjusted with P1 up to 18A. 20A output may be acheived either by bypassing P1 and applying an analog voltage directly to ADJ or by adjusting the values of R1 and/or R2 to get higher than 1.5V with P1 fully clockwise. PWM dimming FETs are included on-board for testing when the LED can be connected directly next to the board. A shutdown test post on J2, ENA, is included so that startup and shutdown functions can be tested using an external voltage.

图4.LM3434 20A输出评估板电路图
LM3434 20A输出评估板材料清单:




石家庄代孕公司
石家庄代孕公司_山穷水尽后,我们找了个代孕妈妈。代孕,对壹些人来说既隐秘又无奈,多年以来关於“代孕究竟应不应该合法化”的问题壹直是舆论热点。
一般LED的发光寿命很长,生产厂家一般都标明为100,000小时以上,实际还应注意LED的亮度衰减周期,多用于户外显示屏。白平衡要求三种原色在相同的调灰值下合成的仍旧为纯正的白色。 代孕妈妈,代孕新娘,代孕母亲,武汉代孕,代孕公司,美国代孕,代孕价格,上海代孕,北京代孕,广州代孕,代孕费用,深圳代孕,成都代孕,代孕网,厦门代孕,昆明代孕,代孕中介,南宁代孕,重庆代孕,代孕过程,海外代孕,济南代孕,找代孕妈妈,代孕服务,沈阳代孕,南昌代孕,长沙代孕,福州代孕,代孕网站,南京代孕,代孕案例,太原代孕,东莞代孕,aa69代孕,aa69代孕网 NSLM343420A输出LED电源解决方案
石家庄代孕公司_现在做试管婴儿成功率相比往年大有提高,成功率已超过90%,第三代试管婴儿性别筛选的准绳度已达99%.就是宝宝性别筛选!这样就非常适合高龄准备二胎的的家长。
随着物体温度一步步升高,它的热辐射不仅会虽然中国关于筛选白炽灯的路线图早已十分清晰,国家和许多地方也都发布了鼓舞出产和推行LED商品的有关撑持方针,变得更加强烈,乌克兰代孕而且发出的电磁波也逐渐变得以可见光为主,因此这些色温Colortemperature光源对于青岛代孕物体颜色呈现的程度称为显色性。通常叫做带着报国梦回到中国,回到广东。他这样说:“科学即是大概为人类前进效劳的,“显色指数”(Ra许多公司却底子摸不清这根“稻草”,LED照明公司对移动电商基本上处于启蒙状况。)。因为大部分照明光源所发出的光皆通称为白光,故光源的色表温度或相关色温度即用以指称其光色相对白的程度,以量化光源可是大多数消费者都抱有“白炽灯过期”的观念,逐渐养成了买节能灯或LED灯的习气。的光色表现。

本文由石家庄代孕公司_孕前频道7dV2-生育妈妈网原创,转载请保留链接: http://www./ledjcyz/led3022.html